- Home
- Latest
- Building Q&As
- Restoration Q&As
Woodboat Restoration Questions Forum.
Below is a selection of DIY Woodboat restoration questions forum posted by concerned boat owners.
Feel free to scroll through the woodboat restoration questions forum, Your problems may already have been addressed.
Or if you have any answers or suggestions to make, please click on the question and join in.
Everyone's opinions and experience are invaluable.
woodboat restoration questions forum
woodboat restoration questions forum
More woodboat restoration questions forum
woodboat restoration questions forum
More woodboat restoration questions forum
What to do with a 14 foot clinker RNSA sailing dinghy that has been sandblasted to remove old paint.
More woodboat restoration questions forum
Barb’s
"new" windshield doesn't lay flat because the bow deck has a pitch.
Has anyone had this situation?
How did you get a good fit?
More woodboat restoration questions forum
More woodboat restoration questions
woodboat restoration questions forum
woodboat restoration questions forum
Bill is looking for advice on caulking and painting the bottom of his 65ft Douglas Fir Fishing Boat.
More woodboat restoration questions
NATIVE ASYNC
Recent Articles
-
Wooden Boat Events 2024
Apr 14, 24 05:15 AM
Wooden Boat Events 2024 calendar, traditional and classic boat festivals and regattas from around the world
- Building Forum
- Materials Forum
- Finishing Forum
- Boat Yard Forum
- Miscellaneous
- Readers Tips
- Readers Yarns
You might like these
Initial Boat Survey Checklist
The initial survey questions to ask when looking at a Wooden Boat with a view to restoring or renovating
Repair Plywood Boats.
How to repair plywood rot or delamination with marine ply, especially on the hull of a small boat.
Net Boat Restoration Part 3
Salty is a 1960 Vintage, Wooden, Harkers Island Net Boat, she is 26'LOA and 9'Beam and this is the unfolding story of her restoration.
The Chris Craft Commander La Donna
Chris Craft, the restoration of a 32 foot, 1957, CC Commander called La Donna
Stem and Stern Post Rebuilding
Repairs to the Stem of a wooden boat can be undertaken by the amateur with a little care and attention.
Wedge Seam Construction
Wedge Seam Construction method for wooden boat building and glued wedging or ‘splining’ as a restoration technique for restoring old carvel planking seams.
Picaroon
This delightful Picaroon is in the process of being restored in Canada.
Wooden Boat Restoration, Repair and Maintainence.
Wooden boat restoration, how to fix up an old wooden boat, one of the cheapest ways to get afloat and have a boat to be proud of.
Salty
Salty is a 1960 Vintage, Wooden, Harkers Island Net Boat, she is 26'LOA and 9'Beam and this is the unfolding story of her restoration.
Surveying a wood boat
The problem areas to look out for when surveying an old wooden boat.
Recent Articles
-
Wooden Boat Events 2024
Apr 14, 24 05:15 AM
Wooden Boat Events 2024 calendar, traditional and classic boat festivals and regattas from around the world -
14’ 1956 Chris Craft, side rail how should it be attached?
Apr 12, 24 03:38 AM
Removing the old side rail most of the screws went between the top deck/skin 1/4” plywood and the side of the hull. See photo, is this correct? I would -
How to laminate plywood on the hull
Apr 10, 24 03:46 AM
I'm working on replacing the bottom of 18' 1969 runabout that has a deep-V plywood hull. It had a 1/2 mahogany plywood bottom that they somehow got to
You might like these
Epoxy Resin for DIY Wooden Boat Building.
A guide to the epoxy resins and sustainable enrtopy resins to use when building wooden boats with marine plywood.
Wood Rot Repair and Treatment
Wood rot in wooden boats, how to treat, repair and replace rotten timbers in a wooden boat
Vintage wood Boat Bottom Replacement
The ultimate bottom repair for a vintage wood boat, when re-caulking the planking on your classic antique boat
Surveying a wood boat
The problem areas to look out for when surveying an old wooden boat.
Initial Boat Survey Checklist
The initial survey questions to ask when looking at a Wooden Boat with a view to restoring or renovating
Stem and Stern Post Rebuilding
Repairs to the Stem of a wooden boat can be undertaken by the amateur with a little care and attention.
Repair Plywood Boats.
How to repair plywood rot or delamination with marine ply, especially on the hull of a small boat.
Planking a Carvel Boat
How to replace damaged or unsound carvel Planking, a guide for any reasonably competent amateur.
Wedge Seam Construction
Wedge Seam Construction method for wooden boat building and glued wedging or ‘splining’ as a restoration technique for restoring old carvel planking seams.
Applying Glass Cloth to Wood Boats.
Some advice on applying glass cloth to wooden boats
YOUR Wooden Boat Questions.
.
Previous Posts
.
preparing wooden hull for painting
I am a new owner of a 18 ft chris craft mahogany boat and my issue is that the boat as been out of the water for 2 full years, and showing sigh of shrinkage …
Longitudinal cracks in ribs: Glue and clamp, or lamination necessary?
We're restoring my South Coast One Design (SCOD) yacht (mahoganny on oak, 1956) and I had an idea for an alternative rib repair:
I know that usually …
Crack repair on the bottom board
I am very new to wooden boat repair.
I purchased a 10' Chaisson Semi Dory refinishing project and have it in my basement workshop.
All of the …
wooden row boat
Hi - i have a 14 wooden row boat in need of some repairs.
I am not sure how to proceed, I was thinking I would start by stripping off the old layers …
10’ Lapstrake/Clinker Style Row Boat Refinishing
How to best approach refinishing the exterior hull of this lapstrake?
It’s 25+ years old, never touched water, hung in the rafters as a prop, looks …
Scraped Keel
Hello everyone. I have a an older (1970) 27' wooden cruiser.
We slid up on a rock ledge and it left a long moderate scrape along the starboard edge …
The floor in the bilge of my 28' Lyman.
Hi Folks! the previous owner of my 1965 28' Lyman took out all the wood flooring in the bilge.
I've painted it all with many coats of bilge paint but …
1965 Cayuga Boat Company
1965 Lapstrake Cayuga 16'
I purchased this in the fall of 2021.
There were soft spots on the bottom, now corrected.
A few new oak ribs.
…
Aluminum strips on the back deck of my Lyman
I have those t shaped strips between the pieces of deck on my 28' 1965 Lyman.
Can anyone tell me how to get a real nice shine on them?
Thanks for …
Keel repair for a 1946 former lifeboat
Hi all,
I bought, without a survey, Salotean, a former lifeboat built from wood by Harland & Wolff in 1946.
She was attached to cruise liners for …
Sloop Restoration, Keel Repairs
Hello DIY Wood Boat Community:
I have begun quite a project to restore a 1979 30' Sloop.
This restoration will occur over the next few months here …
cold moulded mahogany strip, epoxy or no epoxy?
hi I have recently stripped my topsides attend to a few seams and what not .
I was planning on using epoxy and then a uv varnish ontop, however I'm …
hull to kell seal in through bolt
I have a wooden boat 26 feet aldin design built in 1918.
Repaired in 1970s with polyester fiber glass shell over hull refastened with bronze.
New …
Help with transom repair
Recently acquired a mostly finished wood boat.
Builder apparently became ill before his wife then donated to local boat museum where it sat partially …
Small Cracks along seam of Wooden dinghy
I've acquired a custom, 3 year old wooden dinghy, and there are thin (less than 1/16") cracks along a seam above the waterline.
(Boat is built w/ Marine …
Boat/marine Nomenclature
I am restoring a '59 Elgin runabout and most parts are intact but some missing.
One of the problems I have is knowing what some "thing" is actually …
Help with Steering rigging installation for 1958 Penn Yan Runabout
I am looking for guidance or even a quick Zoom call regarding the installation of cable steering rigging into my recently restored 13’ 1958 Penn Yan Runabout. …
C-boat rib separation.
I have a 1967 Melges c-scow.
It measures 20 f.
I have done quite a bit of work repairing cracks and gouges in the bottom as well as the now end …
Keel / Stem Restoration
My father and I are in the process of restoring an old '56 Penn Yan Swift.
Boat looks to be in good condition and have gotten it out on the water a …
1953 14ft Wooden Runabout Restoration
Hello,
I’m new to the forum and super-new to wooden boats.
I’m attempting a restoration of a 14ft runabout, hopefully not biting off more than I …
Advice on refinishing the little plywood Sailboat my father build in the 60's
I am the new keeper of a 12 by 6 foot plywood boat that my father built in the 1960's.
It has been stored indoors and dry (mostly in TX and NM) for …
Wooden rudder
I am not a boat enthusiast so I know very little.
We are moving house and in the shed we have a solid wood rudder which has been there for years. …
keel restoration
Hello guys, due to some water leaks I decided to remove the painting on my 70 years old sailing boat and check the state of the wooden keel.
there are …
Three piece windshield bracket
Hi, I am restoring a 1952 Wagemaker Wolverine.
It is 14 feet long and is constructed of cold molded mahogany.
I have most of the original hardware …
1948 15ft Plywood motor boat Restoration - Sydney, Australia
Hello everyone,
I am restoring a 15ft, 1948 plywood motor boat, and would like to know what your thoughts are on what methods to use.
I have previous …
Seam preparation.
I have traditional Arab sailing boat called a Jahazi built in Lamu, Kenya.
She is about 70 foot.
In Lamu we caulk every few months and I want to …
3 pieces of bottom paint chipped on Century boat
Hi Mike,
My 16ft. 1949 Century plywood hull boat recently developed 3 areas that leak.
Paint is chipped off and I need to make it watertight again. …
What is the best material and method to seal the planks of a Mahogany Cabin on a 1956 Monk Motor Yacht?
Hello. I own a 1956 Monk 40 Ft Bridgedeck Motor Yacht.
I have several topside Cabin leaks.
I am wondering what is the best material to use when …
Plywood boat seam restoration
I am trying to restore an old Mirror and I am finding it very difficult to find info online about how to seal the seams between the plywood construction. …
Borum Star Chief
Hi,
I was recently given a borum star chief 15ft.
I was woundering if anyone has a picture of an original boat so I can see what it was supposed to …
Restoration of 1907 Mylne design 32' canoe stern
Mylne design 1907.
She's been in side the shed for 4 years and really dried out.
Almost see through gaps in some of the planking below the water …
Stem Repair/Replacement on my 1964 24ft Chris Craft
I own a 1964 24ft Lapstrake Hull, Chris Craft.
I have sistered 80 % of the frames but want to repair/teplace the Stem in the Bow.
Any Suggestions. …
sealing seams of teak bottom planks on 12' skiff heidi
Hi- I am doing some restoration work on the 12 ft skiff- heidi.
It has a lapstrake hull and flat bottom cross-planked with teak deck boards.
What …
Entering your question is easy, just type into the form.
Or you may find it easier to type your entry in a word-processor, then copy and paste it into the form.
Don't worry too much about grammar etc as I will check your entry before publication.
The more information you give the easier it will be to provide a pertinent answer.
Thing you might like to include are;
- The nature of your problem
- The type of boat
- Year of build
- Her size
- Her construction
- The type of timber used
- Location
Photo Uploader
If you are having problems uploading Photos or would like to add more click on this link for the Upload Form.
This work is licensed under a Creative Commons Attribution-ShareAlike 2.0 UK: England & Wales License.
I am perfectly aware that the majority of Wooden Boat aficionados are sensible folk.
However, I need to point out that I am an amateur wooden boat enthusiast simply writing in order to try to help other amateur wooden boat enthusiasts.
And while I take every care to ensure that the information in DIY Wood Boat.com is correct, anyone acting on the information on this website does so at their own risk.